Digi-Pas® DWL-5500XY is a 2-Axis Precision Inclination Sensor Module of accuracy (0.001° or 18µm/M or 3.6 arcsec) that specifically designed to be integrated into a machine/equipment/structure for real-time simultaneous monitoring of leveling status & vibration measurement. These intelligent inclination sensor modules are embedded with advanced MEMS technology sensor, developed for 2D planar leveling, tilt angle monitoring, alignment and vibration measurement.
Inclination sensor modules are tough, durable, waterproof, shock resistance, small footprint and enabled to communicate through various protocols such as USB, RS232, RS485 & Wireless Bluetooth.
0.000° ~ ± 10.000° SingleAxis
0.000° ~ ± 5.000° Dual-Axis
0.001° (18µm/M or 0.0002 in/ft)
± 0.001° at 0° ~ 2.000°
± 0.003° at other angles
Multiple I/O communication protocols i.e. USB, RS232, RS485 & (optional) Bluetooth connectivity
IP65 certified - waterproof protection
Response time at 400 ~ 500ms.
Shock/Impact Test survives over 3,000g to 6,000g
Built-in vibrometer for real time low-frequency (2 to 75Hz) vibration measurement
User-friendly PC-based programmable software
Operating Temperature : -4°F to 160°F or -20 to +70°C
PLANAR & WIDE ANGLE RANGE MEASUREMENT
Precision levelling and tilt angles measurement essentially involve simultaneous 2-dimensional planes rather than conventionally known as two independent single-axis. Digi-Pas® 2-axis intelligent inclination modules having high precision and wide measurement range are capable of providing real-time levelling, angular & vibration readings that empower application engineers to continuously measure and monitor machine/equipment/structure angular positional status precisely and speedily.
These small footprint, 2-axis and high shock resistant MEMS driven inclination sensor modules effectively eliminate limitations associated with using multiple single-axis sensors or bulky pendulum/servo-based sensors to achieve precise 2D levelling and planar angular measurements. MEMS sensor contents no moving part, essentially requires little/no maintanance when compared to pendulum-based sensor.
PROGRAMMABLE & USER-DEFINABLE SYSTEM
Digi-Pas® 2-axis precision inclination sensor module system is designed to be integrated into precision machine/equipment/structure enabling application engineers to instantly access angular positional status without the need for tedious and time-consuming programming.
The angular measurement system enables user-defined settings to activate any external connected peripheral devices at ease.
DWL-5000XY Series Inclination Sensor Modules accuracy is verified by accredited 3rd party independent calibration & test bodies and National Metrology Centre traceable to SI standard and NIST, JIS, UKAS & DIN under CIPM MRA.
DUAL ANGLE DISPLAY
Measuring resolution of 0.001° with Accuracy ± 0.001° (18µm/m) at 0° ~ ±2.000°; ±0.003° at other angles
Single Axis measuring range 0° ~ ±10.000°
Dual Axis measuring range 0° ~ ±5.000°
ALTERNATE ZERO SETTING
Enable user to measure relative angles at a common plane with respect to a reference angle. The reference angle can be set using alternate zero feature.
The sensor module is waterproof rated and enable to be located in harsh working environment.
USER SELF CALIBRATION
Easy self-calibration feature allows user to reset the digital level back to factory preset accuracy.
USB LINK TO PC
USB connection for remote acquisition, monitoring, data logging & analysis in computer.
PC SYNC SOFTWARE - BASIC EDITION
Enable basic features of remote data acquisition on Angular Measurements.
WIRELESS SYNC (OPTIONAL)
Wireless connection (Bluetooth industrial class 1) to device for remote monitoring, data logging & analysis from computer. (PRO PC sync software is required)
PC SYNC SOFTWARE - PROFESSIONAL EDITION (OPTIONAL)
Enable advance features to set parameters and triggering relay outputs for remote data acquisition, logging, processing, analysis on angular measurements and control output of peripheral devices.
Application diagram 1 - Multiple Sensor Modules
Application diagram 2 - Single Sensor Module
Digi-Pas® DWL-5500XY products are installed in the marine/off-shore platform to monitor in real time its two- dimensional tilt angles for safety control.
Digi-Pas® DWL-5000XY & DWL5500XY sensor modules have been utilized by leading companies in autonomous vehicles or driveless cars as part of the advanced control system to detect and interpret car's real-time inclination/angular position in various road conditions assisting to negotiate appropriate navigation path when subjected to tilt-related obstacles.
Digi-Pas® DWL-5500XY products are installed in the deep-sea commercial submarine to assist directional maneuver and control.
Digi-Pas® DWL-5500XY is installed in the Precision Coordinate Measurement Machine (CMM) for Levelling, vibration real time monitoring & ensuring machine's Positional Stability to achieve High Quality Sharp Image Capturing & thus optimize CMM accuracy performance.
Digi-Pas® DWL-5500XY is used for manufacturing automation applications. Typically for critical processes for Robot Welding angles, Robotic Assembly Arms and precision automatic manipulators.
The Digi-Pas® DWL-5500XY model is embedded in the structure of a satellite dish for real-time continuous position tracking.
Digi-Pas® DWL-5500XY products are used for Crane tilt-angle safety control and management.
Digi-Pas® DWL-5500XY is used for levelling research laboratory precision instruments.
Digi-Pas® DWL-5500XY is used in the manufacturing of large format industrial and commercial printers, and also the installation, set up and preventive maintenance of such precision large printers in achieving high fidelity colour, quality image performance and reducing waste.
Digi-Pas® DWL-5500XY is used for Vision Measurement Equipment Installation & Setup. Levelling & Checking Equipment's Positional Stability for High Quality Sharp Image Capturing & Measurement.
Digi-Pas® DWL-5500XY is used for levelling and vibration measurement of achieving high stability & high quality image on Computerized axial Tomography Scan (CT Scan) and Magnetic resonance imaging (MRI) equipment.
Digi-Pas® DWL-5500XY is used for aligning precision fixtures.